Torna indietro   Hardware Upgrade Forum > Software > Microsoft Windows > Microsoft Windows 7 e Vista > Guida alla risoluzione dei problemi

ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ultrawide si fondono
ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ultrawide si fondono
Da ASUS un monitor particolare ma molto completo: principalmente indirizzato al videogiocatore, può essere sfruttato con efficacia anche per attività creative e di produzione multimediale
Dreame L10s Pro Ultra Heat: la pulizia di casa tutta sostanza
Dreame L10s Pro Ultra Heat: la pulizia di casa tutta sostanza
Il nuovo robot aspirapolvere domestico di Dreame abbina funzionalità complete a un moccio flottante che raggiunge al meglio gli angoli delle pareti. Un prodotto tutto in uno semplice da utilizzare ma molto efficace, in grado di rispondere al meglio alle necessità di pulizia della casa
HONOR Magic6 Pro: come funziona Magic Portal, il modo ''intelligente'' di condividere
HONOR Magic6 Pro: come funziona Magic Portal, il modo ''intelligente'' di condividere
HONOR ha introdotto con Magic6 Pro la funzione Magic Portal che consente, tramite intelligenza artificiale, di suggerire scorciatoie agli utenti in modo da permettere di passare e accedere facilmente ai servizi tra app e dispositivi con un semplice tocco. Vi spieghiamo qui come funziona
Tutti gli articoli Tutte le news

Vai al Forum
Rispondi
 
Strumenti
Old 27-05-2009, 18:03   #81
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Quote:
Originariamente inviato da lcpreben Guarda i messaggi
Che c'entra il file system l'avevo intuito Resta da vedere cosa ha causato il conflitto. Fra un pò finisco di scaricare i Symbols per analizzare meglio l'errore.
Comuqnue non è necessario scaricarli.
Apri il debugger e dove ti dice di inserire il percorso dei symbols inserisci una stringa che era stata suggerita e che ti faceva scaricare i symbols giusti direttamente da MS. Cerca tra i posts e la trovi.
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 28-05-2009, 14:39   #82
lcpreben
Senior Member
 
L'Avatar di lcpreben
 
Iscritto dal: Nov 2008
Città: Verona
Messaggi: 767
Ecco il debug. Chi mi sa aiutare?
Codice:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff800020d7a36, fffffa6007d5e2b0, 0}

Probably caused by : ntkrnlmp.exe ( nt!NtClearEvent+37 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------
__________________
CASE: Cooler Master CM690; POWER SUPPLY: Corsair TX650W; MOTHERBOARD: Asus P5Q Pro; CPU: Core 2 Quad Q6600 @ 3.0Ghz + AC Freezer 7 PRO; VGA: Sapphire HD 7850 1GB OC; HD: Seagate Barracuda 500GB; RAM: Corsair DDR2 800Mhz 2X2GB MONITOR: Samsung T200
lcpreben è offline   Rispondi citando il messaggio o parte di esso
Old 28-05-2009, 20:22   #83
nickdc
Senior Member
 
Iscritto dal: Jan 2005
Messaggi: 21497
A me su 7 con la 1900xt e i driver che scarica win update ha dato due volte schermata blu quando applicavo un'immagine come sfondo, credo sia dovuto ai driver acerbi...l'ha fatto a qualcun altro?
__________________
cpu ryzen 7600 | mobo msi b650 tomahawk | ram g.skill trident z5 neo 2x16gb | ssd wd sn850x 2tb | vga asus 4070 super | ali msi a850g | case cm qube 500 | monitor lg 27gp850
nickdc è offline   Rispondi citando il messaggio o parte di esso
Old 28-05-2009, 20:39   #84
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Quote:
Originariamente inviato da lcpreben Guarda i messaggi
Ecco il debug. Chi mi sa aiutare?
Codice:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff800020d7a36, fffffa6007d5e2b0, 0}

Probably caused by : ntkrnlmp.exe ( nt!NtClearEvent+37 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800020d7a36, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa6007d5e2b0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.

FAULTING_IP: 
nt!ObReferenceObjectByHandle+206
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9]

CONTEXT:  fffffa6007d5e2b0 -- (.cxr 0xfffffa6007d5e2b0)
rax=0000000000000001 rbx=fffffa6007d5ec28 rcx=00000000000002f4
rdx=0000000000000002 rsi=0000000000715500 rdi=fffffa800423a060
rip=fffff800020d7a36 rsp=fffffa6007d5eb10 rbp=0000000000000000
 r8=fffff880106a7000  r9=0000100000000000 r10=fffff800020d0e00
r11=000000000026f100 r12=fffff8800d411110 r13=00000000000002f4
r14=0000000000000001 r15=fffffa800512b830
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
nt!ObReferenceObjectByHandle+0x206:
fffff800`020d7a36 4b8b0408        mov     rax,qword ptr [r8+r9] ds:002b:00000880`106a7000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  CoDWaW.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800020d0e37 to fffff800020d7a36

STACK_TEXT:  
fffffa60`07d5eb10 fffff800`020d0e37 : 00000000`000bfa00 fffff800`00000002 fffffa80`039aedc0 00000000`00000001 : nt!ObReferenceObjectByHandle+0x206
fffffa60`07d5ebe0 fffff800`01e5ddf3 : fffffa80`0423a060 00000000`00000000 00000000`00da7a64 fffffa80`047000f0 : nt!NtClearEvent+0x37
fffffa60`07d5ec20 00000000`75c23d09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0007ee68 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x75c23d09


FOLLOWUP_IP: 
nt!NtClearEvent+37
fffff800`020d0e37 85c0            test    eax,eax

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!NtClearEvent+37

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  48d1ba35

STACK_COMMAND:  .cxr 0xfffffa6007d5e2b0 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

BUCKET_ID:  X64_0x3B_nt!NtClearEvent+37

Followup: MachineOwner
---------
Stavi giocando a COD WAW per caso?
perchè compare la voce "PROCESS_NAME: CoDWaW.exe".
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 28-05-2009, 21:52   #85
lcpreben
Senior Member
 
L'Avatar di lcpreben
 
Iscritto dal: Nov 2008
Città: Verona
Messaggi: 767
Esatto, ma la voce da guardare è questa:
IMAGE_NAME: ntkrnlmp.exe
E' un file di Windows, ma non ho trovato molte informazioni a riguardo.
__________________
CASE: Cooler Master CM690; POWER SUPPLY: Corsair TX650W; MOTHERBOARD: Asus P5Q Pro; CPU: Core 2 Quad Q6600 @ 3.0Ghz + AC Freezer 7 PRO; VGA: Sapphire HD 7850 1GB OC; HD: Seagate Barracuda 500GB; RAM: Corsair DDR2 800Mhz 2X2GB MONITOR: Samsung T200
lcpreben è offline   Rispondi citando il messaggio o parte di esso
Old 28-05-2009, 22:03   #86
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Quote:
Originariamente inviato da lcpreben Guarda i messaggi
Esatto, ma la voce da guardare è questa:
IMAGE_NAME: ntkrnlmp.exe
E' un file di Windows, ma non ho trovato molte informazioni a riguardo.
Ok bene. Hmmmm hai tutto settato normale? Niente OC?
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 28-05-2009, 22:05   #87
lcpreben
Senior Member
 
L'Avatar di lcpreben
 
Iscritto dal: Nov 2008
Città: Verona
Messaggi: 767
Ho il processore a 3Ghz anzichè 2.4. Ma non penso sia l'OC la causa, per me è proprio Winzozz
__________________
CASE: Cooler Master CM690; POWER SUPPLY: Corsair TX650W; MOTHERBOARD: Asus P5Q Pro; CPU: Core 2 Quad Q6600 @ 3.0Ghz + AC Freezer 7 PRO; VGA: Sapphire HD 7850 1GB OC; HD: Seagate Barracuda 500GB; RAM: Corsair DDR2 800Mhz 2X2GB MONITOR: Samsung T200
lcpreben è offline   Rispondi citando il messaggio o parte di esso
Old 28-05-2009, 22:10   #88
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Io avevo questo problema perchè le ram non erano settate bene pur stanto su auto. Strano vero? Comunque io vedrei le ram come le hai settate. Di solito questi problemi sono provocati da un settaggio sbagliato delle ram per OC oppure da qualche errore delle stesse. Hai provato a fare un test con Memtest?
Io cercherei sul forum dei suggerimenti per settare correttamente il bios per tenere la CPU a 3.0Ghz. Quando avevo il E8500 e lo tenevo a 4.1 Ghz avevo dovuto settare varie voci del bios per non avere crash di questo tipo comprese le ram e il voltaggio.
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 29-05-2009, 00:09   #89
lovsky
Senior Member
 
L'Avatar di lovsky
 
Iscritto dal: May 2003
Città: Napoli (Arenella) Trattative a buon fine:71
Messaggi: 4294
ma il mio log nessuno l'ha visto crycry e' 3 post su
__________________
Mela: Macbook Air i5 2020. PC: Thermaltake P3+Z170-A+Intel i7 6700k@4,5Ghz+NZXT KrakenX62+Corsair Vengeance C16@3,2ghz+Samsung 840EVO250Gb+Samsung 970 EVO Plus NVMe M.2+Gygabyte Gtx 1080 G1. Asus MX27UQ. Fidelio X1@Schiit Modi+Magni
Nikon D7000+Sigma 17-70mm f/2.8-4 DC Macro OS HSM+ 105mm f2.8 EX DG macro Nikkor 50mm AF-S 1.8G
flickr™
lovsky è offline   Rispondi citando il messaggio o parte di esso
Old 29-05-2009, 00:41   #90
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Quote:
Originariamente inviato da lovsky Guarda i messaggi
ma il mio log nessuno l'ha visto crycry e' 3 post su
Scusa. Allora visto che fa riferimento a NFTS quindi al fily system io farei un check dell'HD possibilmente con un software del produttore dell'HD stesso.
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 29-05-2009, 01:02   #91
lovsky
Senior Member
 
L'Avatar di lovsky
 
Iscritto dal: May 2003
Città: Napoli (Arenella) Trattative a buon fine:71
Messaggi: 4294
Quote:
Originariamente inviato da Crimson Skies Guarda i messaggi
Scusa. Allora visto che fa riferimento a NFTS quindi al fily system io farei un check dell'HD possibilmente con un software del produttore dell'HD stesso.
ahah era ironico grazie mille per l'attenzione cmq
Ho fatto scandisk con ripristino di settori (insomma la seconda opzione dello scandisk) durato 2 ore ma niente...
__________________
Mela: Macbook Air i5 2020. PC: Thermaltake P3+Z170-A+Intel i7 6700k@4,5Ghz+NZXT KrakenX62+Corsair Vengeance C16@3,2ghz+Samsung 840EVO250Gb+Samsung 970 EVO Plus NVMe M.2+Gygabyte Gtx 1080 G1. Asus MX27UQ. Fidelio X1@Schiit Modi+Magni
Nikon D7000+Sigma 17-70mm f/2.8-4 DC Macro OS HSM+ 105mm f2.8 EX DG macro Nikkor 50mm AF-S 1.8G
flickr™
lovsky è offline   Rispondi citando il messaggio o parte di esso
Old 29-05-2009, 01:12   #92
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Quote:
Originariamente inviato da lovsky Guarda i messaggi
ahah era ironico grazie mille per l'attenzione cmq
Ho fatto scandisk con ripristino di settori (insomma la seconda opzione dello scandisk) durato 2 ore ma niente...
Gli HD che marca sono?
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 29-05-2009, 01:57   #93
lovsky
Senior Member
 
L'Avatar di lovsky
 
Iscritto dal: May 2003
Città: Napoli (Arenella) Trattative a buon fine:71
Messaggi: 4294
FUJITSU MHY2200BH ATA Device

__________________
Mela: Macbook Air i5 2020. PC: Thermaltake P3+Z170-A+Intel i7 6700k@4,5Ghz+NZXT KrakenX62+Corsair Vengeance C16@3,2ghz+Samsung 840EVO250Gb+Samsung 970 EVO Plus NVMe M.2+Gygabyte Gtx 1080 G1. Asus MX27UQ. Fidelio X1@Schiit Modi+Magni
Nikon D7000+Sigma 17-70mm f/2.8-4 DC Macro OS HSM+ 105mm f2.8 EX DG macro Nikkor 50mm AF-S 1.8G
flickr™
lovsky è offline   Rispondi citando il messaggio o parte di esso
Old 29-05-2009, 14:20   #94
nickdc
Senior Member
 
Iscritto dal: Jan 2005
Messaggi: 21497
Al momento di caricare il file dmp con windows debugger, mi dice che non ho le autorizzazioni necessarie, eppure sono loggato come amministratore...come posso risolvere?
__________________
cpu ryzen 7600 | mobo msi b650 tomahawk | ram g.skill trident z5 neo 2x16gb | ssd wd sn850x 2tb | vga asus 4070 super | ali msi a850g | case cm qube 500 | monitor lg 27gp850
nickdc è offline   Rispondi citando il messaggio o parte di esso
Old 29-05-2009, 15:09   #95
lcpreben
Senior Member
 
L'Avatar di lcpreben
 
Iscritto dal: Nov 2008
Città: Verona
Messaggi: 767
Quote:
Originariamente inviato da Crimson Skies Guarda i messaggi
Io avevo questo problema perchè le ram non erano settate bene pur stanto su auto. Strano vero? Comunque io vedrei le ram come le hai settate. Di solito questi problemi sono provocati da un settaggio sbagliato delle ram per OC oppure da qualche errore delle stesse. Hai provato a fare un test con Memtest?
Io cercherei sul forum dei suggerimenti per settare correttamente il bios per tenere la CPU a 3.0Ghz. Quando avevo il E8500 e lo tenevo a 4.1 Ghz avevo dovuto settare varie voci del bios per non avere crash di questo tipo comprese le ram e il voltaggio.
Ebbene si tutti i settaggi delle ram li ho su AUTO, in quqesta maniera i timings sono più rilassati però Non dovrebbero creare problemi. Boh
Com MEmtest cosa si pu vedere? Perchè so che dura tantissimo, mi tocca lasciare il pc acceso tutta la notte.
__________________
CASE: Cooler Master CM690; POWER SUPPLY: Corsair TX650W; MOTHERBOARD: Asus P5Q Pro; CPU: Core 2 Quad Q6600 @ 3.0Ghz + AC Freezer 7 PRO; VGA: Sapphire HD 7850 1GB OC; HD: Seagate Barracuda 500GB; RAM: Corsair DDR2 800Mhz 2X2GB MONITOR: Samsung T200
lcpreben è offline   Rispondi citando il messaggio o parte di esso
Old 30-05-2009, 15:57   #96
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Quote:
Originariamente inviato da lcpreben Guarda i messaggi
Ebbene si tutti i settaggi delle ram li ho su AUTO, in quqesta maniera i timings sono più rilassati però Non dovrebbero creare problemi. Boh
Com MEmtest cosa si pu vedere? Perchè so che dura tantissimo, mi tocca lasciare il pc acceso tutta la notte.
Con memtest, versione bootabile testi le ram magari 1 banco per volta e vedi se hanno problemi e se danno errori significa che hanno problemi che poi si ripercuotono sul S.O.
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 30-05-2009, 18:56   #97
ezio
Senior Member
 
L'Avatar di ezio
 
Iscritto dal: Apr 2001
Città: Giovinazzo(BA) ...bella città, riso patat e cozz a volontà!
Messaggi: 26480
Quote:
Originariamente inviato da lovsky Guarda i messaggi
Ragazzi salve a tutti, premetto che ho un notebook Sony Vaio CR41s,win Vista con HD usb collegato,mouse razer diamondback e scheda audio esterna ESI u24 xl il tutto tramite usb hub autoalimentato. Ogni avvio del pc o ripresa da ibernazione,(diciamo 1 volta su 3,4) ho errore del file ntfs.sys
Ho aperto il .dmp con questo risultato:
Prova a disconnettere tutte le periferiche usb (razer compreso) ed effettua un ripristino dallo stato d'ibernazione, qualche driver di periferica potrebbe non supportare correttamente il "risveglio" dopo la sospensione.

Quote:
Originariamente inviato da lcpreben Guarda i messaggi
Probably caused by : ntkrnlmp.exe ( nt!NtClearEvent+37 )
PROCESS_NAME: CoDWaW.exe
Se il problema persiste, la prima cosa da fare è disabilitare l'overclock del processore e riprovare.
Secondariamente, proverei in successione quanto segue:
- disattiva il Cool and Quite se hai una cpu AMD o C1e e SpeedStep in caso di cpu Intel. Volendo, potresti provare a lasciarli attivi da bios disattivando il risparmio energetico del processore in Windows Vista;
- assicurati di aver aggiornato i driver della scheda video;
- imposta, per il processo di CoD5, l'affinità per un singolo core del processore: Vista/Win7 - Affinità processori multicore

Altrimenti va eseguito un controllo hardware delle memorie, ad esempio con Memtest come suggeriva Crimsom. In questo thread trovi link per il download e relative guide all'utilizzo dei software citati:
Analisi e comparativa tool/procedure di emergenza


Quote:
Originariamente inviato da nickdc Guarda i messaggi
Al momento di caricare il file dmp con windows debugger, mi dice che non ho le autorizzazioni necessarie, eppure sono loggato come amministratore...come posso risolvere?
Avvia il debugger come amministratore (tasto destro --> Esegui come amministratore), altrimenti Windbg non potrà accedere a c:\Windows
ezio è offline   Rispondi citando il messaggio o parte di esso
Old 30-05-2009, 20:30   #98
Crimson Skies
Bannato
 
Iscritto dal: Feb 2008
Città: Roma
Messaggi: 2453
Condordo. Il solo O.C. della CPU deve essere accompagnato dalle altre variabili del bios come già avevo suggerito. Togli l'O.C. e vedi se da ancora problemi.
Crimson Skies è offline   Rispondi citando il messaggio o parte di esso
Old 30-05-2009, 22:55   #99
lovsky
Senior Member
 
L'Avatar di lovsky
 
Iscritto dal: May 2003
Città: Napoli (Arenella) Trattative a buon fine:71
Messaggi: 4294
Quote:
Originariamente inviato da ezio Guarda i messaggi
Prova a disconnettere tutte le periferiche usb (razer compreso) ed effettua un ripristino dallo stato d'ibernazione, qualche driver di periferica potrebbe non supportare correttamente il "risveglio" dopo la sospensione.


Se il problema persiste, la prima cosa da fare è disabilitare l'overclock del processore e riprovare.
Secondariamente, proverei in successione quanto segue:
- disattiva il Cool and Quite se hai una cpu AMD o C1e e SpeedStep in caso di cpu Intel. Volendo, potresti provare a lasciarli attivi da bios disattivando il risparmio energetico del processore in Windows Vista;
- assicurati di aver aggiornato i driver della scheda video;
- imposta, per il processo di CoD5, l'affinità per un singolo core del processore: Vista/Win7 - Affinità processori multicore

Altrimenti va eseguito un controllo hardware delle memorie, ad esempio con Memtest come suggeriva Crimsom. In questo thread trovi link per il download e relative guide all'utilizzo dei software citati:
Analisi e comparativa tool/procedure di emergenza



Avvia il debugger come amministratore (tasto destro --> Esegui come amministratore), altrimenti Windbg non potrà accedere a c:\Windows
Sai penso proprio che tu abbia ragione per quanto riguarda forse ESI 24XL(la scheda audio esterna usb)...
Ma in questo caso che posso fare??
__________________
Mela: Macbook Air i5 2020. PC: Thermaltake P3+Z170-A+Intel i7 6700k@4,5Ghz+NZXT KrakenX62+Corsair Vengeance C16@3,2ghz+Samsung 840EVO250Gb+Samsung 970 EVO Plus NVMe M.2+Gygabyte Gtx 1080 G1. Asus MX27UQ. Fidelio X1@Schiit Modi+Magni
Nikon D7000+Sigma 17-70mm f/2.8-4 DC Macro OS HSM+ 105mm f2.8 EX DG macro Nikkor 50mm AF-S 1.8G
flickr™
lovsky è offline   Rispondi citando il messaggio o parte di esso
Old 31-05-2009, 11:42   #100
lcpreben
Senior Member
 
L'Avatar di lcpreben
 
Iscritto dal: Nov 2008
Città: Verona
Messaggi: 767
Quote:
Originariamente inviato da ezio Guarda i messaggi
Se il problema persiste, la prima cosa da fare è disabilitare l'overclock del processore e riprovare.
Secondariamente, proverei in successione quanto segue:
- disattiva il Cool and Quite se hai una cpu AMD o C1e e SpeedStep in caso di cpu Intel. Volendo, potresti provare a lasciarli attivi da bios disattivando il risparmio energetico del processore in Windows Vista;
- assicurati di aver aggiornato i driver della scheda video;
- imposta, per il processo di CoD5, l'affinità per un singolo core del processore: Vista/Win7 - Affinità processori multicore

Altrimenti va eseguito un controllo hardware delle memorie, ad esempio con Memtest come suggeriva Crimsom. In questo thread trovi link per il download e relative guide all'utilizzo dei software citati:
Analisi e comparativa tool/procedure di emergenza
-SpeedStep e C1e li ho attivati, in questo modo quando il processore è in IDLE il moltiplicatore si abbassa; è proprio necessario rinunciare a questa funzione? Mi è comoda.
-Driver aggiornati, Catalyst 9.5 appena usciti.
-Lo farò, e verificherò se la schermata si ripete solo con CoD5 o anche con altri igochi. Ricordo però che mi apparse una schermata blu anche giocando a GTAIV, ma non ho avuto l'occasione di analizzare il log.

Prossimamente farò anche il Memtest, intanto grazie a tutti per l'aiuto.
__________________
CASE: Cooler Master CM690; POWER SUPPLY: Corsair TX650W; MOTHERBOARD: Asus P5Q Pro; CPU: Core 2 Quad Q6600 @ 3.0Ghz + AC Freezer 7 PRO; VGA: Sapphire HD 7850 1GB OC; HD: Seagate Barracuda 500GB; RAM: Corsair DDR2 800Mhz 2X2GB MONITOR: Samsung T200
lcpreben è offline   Rispondi citando il messaggio o parte di esso
 Rispondi


ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ultrawide si fondono ASUS ROG Swift OLED PG49WCD: quando QD-OLED e ul...
Dreame L10s Pro Ultra Heat: la pulizia di casa tutta sostanza Dreame L10s Pro Ultra Heat: la pulizia di casa t...
HONOR Magic6 Pro: come funziona Magic Portal, il modo ''intelligente'' di condividere HONOR Magic6 Pro: come funziona Magic Portal, il...
L'innovazione richiede fiducia: Workday si propone come guida nell'era dell'IA L'innovazione richiede fiducia: Workday si propo...
Recensione HONOR Pad 9: ampio display e audio top per il tablet per l'intrattenimento Recensione HONOR Pad 9: ampio display e audio to...
Alfa Romeo Milano, scopriamo profilo e l...
Hisense vende un TV FHD 32 pollici con Q...
Cisco Webex anche in auto: ora è ...
Phil Schiller, il boss dell'App Store di...
Lola in Formula E insieme a Yamaha, due ...
Motorola MA1 è l'accessorio ideale per u...
Tineco e aspirapolveri senza fili, la nu...
Blocco note, c'è un modo per ripr...
Relic Entertainment dice addio a SEGA: l...
SPATIUM M580 FROZR, il nuovo SSD PCIe Ge...
Le schede video NVIDIA GeForce RTX con i...
Claude batte ChatGPT: la battaglia tra i...
Tutti i dispositivi Ring in offerta: cit...
AI PC, le caratteristiche dietro a una d...
AirPods e iPhone 15 in offerta: modello ...
Chromium
GPU-Z
OCCT
LibreOffice Portable
Opera One Portable
Opera One 106
CCleaner Portable
CCleaner Standard
Cpu-Z
Driver NVIDIA GeForce 546.65 WHQL
SmartFTP
Trillian
Google Chrome Portable
Google Chrome 120
VirtualBox
Tutti gli articoli Tutte le news Tutti i download

Strumenti

Regole
Non Puoi aprire nuove discussioni
Non Puoi rispondere ai messaggi
Non Puoi allegare file
Non Puoi modificare i tuoi messaggi

Il codice vB è On
Le Faccine sono On
Il codice [IMG] è On
Il codice HTML è Off
Vai al Forum


Tutti gli orari sono GMT +1. Ora sono le: 11:59.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Served by www3v