Problema Overclock I7 6700K
Ho provato ad overcloccare un I7 6700K, raffreddato a liquido, su una MSI Z170A Krait gaming X3, aggiornata all'ultimo bios, facendo questi tentativi nelle impostazioni:
OC Explore Mode: expert mode CPU Ratio Apply Mode: all core CPU Ratio: 46 CPU Ratio mode: Dynamic Mode/Fixed Mode Ring Ratio: Auto EIST: Enabled / Disabled Intel Turbo Boost:Enabled/Disabled CPU Core Voltage: 1.35v / 1.40v Ho provato anche a disabilitare queste funzioni: Intel Adaptive Thermal Monitor e Intel C-State Ho provato con Linx, prime 95 e IBT e con tutti il comportamento è sempre lo stesso: dopo un paio di minuti il moltiplicatore si abbassa a 44 e la frequenza a 4400MHz, continuando il test a questa frequenza fissa. Le temperature sono sempre buone. Sapete se è normale o c'è qualcosa che provoca questo comportamento anomalo? |
Probabilmente il problema è solo il CPU Current Limit, devi alzarlo
|
Ti riferisci alla voce presente nella sezione "CPU Feautures"?
Ti riporto quelle più rilevanti: ▶CPU Features Press <Enter> to enter the sub-menu. ▶Intel VT-D Tech [Disabled] Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology. ▶Hardware Prefetcher [Enabled] ▶Adjacent Cache Line Prefetch [Enabled] Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher). ▶CPU AES Instructions [Enabled] Enables or disables the CPU AES (Advanced Encryption Standard-New Instructions) support. This item appears when a CPU supports this function. ▶Intel Adaptive Thermal Monitor [Enabled] Enables or disables the Intel adaptive thermal monitor function to protect the CPU from overheating. [Enabled] Throttles down the CPU core clock speed when the CPU is over the adaptive temperature. ▶Intel C-State [Auto] Enables or disables the Intel C-state. C-state is a processor power management technology defined by ACPI. ▶C1E Support [Disabled] Enables or disables the C1E function for power-saving in halt state. This item appears when Intel C-State is enabled. ▶Package C State limit [Auto] This item allows you to select a CPU C-state level for power-saving when system is idle. The options of C-state depend on the installed CPU. This item appears when Intel C-State is enabled. ▶CFG Lock [Enabled] Lock or un-lock the MSR 0xE2[15], CFG lock bit. ▶EIST [Enabled] Enables or disables the Enhanced Intel® SpeedStep Technology. This item will appear when OC Explore Mode is set to Normal. [Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically. It can decrease average power consumption and average heat production. ▶Intel Turbo Boost [Enabled] Enables or disables the Intel® Turbo Boost. This item is for Normal mode and appears when a CPU that support Turbo Boost is installed. [Enabled] Enables this function to boost CPU performance automatically over specification when system request the highest performance state. ▶Long Duration Power Limit (W) [Auto] Sets the long duration TDP power limit for CPU in Turbo Boost mode. ▶Long Duration Maintained (s) [Auto] Sets the maintaining time for Long duration power Limit(W). ▶Short Duration Power Limit (W) [Auto] Sets the short duration TDP power limit for CPU in Turbo Boost mode. ▶CPU Current Limit (A) [Auto] Sets maximum current limit of CPU package in Turbo Boost mode. When the current is over the specified value, the CPU will automatically reduce the core frequency for reducing the current. ▶FCLK Frequency [Auto] Sets FCLK frequency. Lower FCLK frequency may help you to set higher base clock frequency. ▶DMI Link Speed [Auto] Sets DMI speed |
Si è questa
▶CPU Current Limit (A) [Auto] Sets maximum current limit of CPU package in Turbo Boost mode. When the current is over the specified value, the CPU will automatically reduce the core frequency for reducing the current. |
Quote:
Devo impostare il valore massimo? |
Quote:
Comunque quello è un limite quindi più puoi metterlo e più hai margine in teoria, io ricordo un 140% ma non ricordo se era su quella piattaforma o su haswell |
Ho impostato tutti i limiti al massimo, dalla sezione "cpu Futures" e adesso è più stabile, ma comunque ad un certo punto ho dei cali continuo del moltiplicatore (la frequenza non si abbassa a 4200 fissi, ma sale e scende continuamente).
Ho monitorato con hwinfo e mi risultano questi avvisi in concomitanza con i cali di frequenza: IA: VR Thermal Alert and RING: VR Thermal Alert on Yes. Immagino sia la temperatura dei vrm della scheda madre o di qualcosa integrato al processore. Quindi avrei qualche domanda a riguardo: 1) di cosa si tratta precisamente? (è questa la causa?) 2) Oltre ad abbassare il vcore e provare a piazzare una ventola sui dissipatori della scheda madre sui VRM, c'è qualche altra impostazione che posso provare nei settaggi del bios (tipo abbassare qualche altra frequenza o voltaggio oltre al vcore) ? Il caso è un big tower con due ventole 140 in immissione, una 120 in estrazione sul back e 3 120 in estrazione sul radiatore sul top del case. |
Quote:
https://www.hwinfo.com/forum/threads...question.5246/ 2) prova. altrimenti vedi se la scheda madre ha delle opzioni tipo queste https://old.reddit.com/r/overclockin...i_vrm_options/ |
fai i screen del bios sei sicuro che non vai alto di temp e taglia? o se hai impostato avx
|
Tutti gli orari sono GMT +1. Ora sono le: 15:44. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Hardware Upgrade S.r.l.