The_Player
21-10-2018, 10:21
Ciao ragazzi da un pò di tempo ho un problema con la mia stampante. Non riesco a stampare. Visualizzo sul display della stampante il messaggio "Errore inchiostro. Impossibile stampare. Vedere documentazione stampante Err. 0xc18a0206. Spegnere e riaccendere"
Ovviamente ho spento e riacceso millemila volte, ho provato a seguire le varie guide online tipo:
Step 1: Use genuine HP ink cartridges.
Step 2: Reset the printer.
In some cases, removing the ink cartridges and resetting the printer can clear the error message.
Turn on the printer.
Wait until the printer is idle and silent before you continue.
Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave your printer connected to the network.
Remove the ink cartridges from the printer.
With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
Wait at least 60 seconds.
Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to a wall outlet.
Reconnect the power cord to the rear of the printer.
Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Reinsert the ink cartridges, and then close the ink cartridge access door.
If you receive a prompt to print a calibration page, do so.
If you disconnected the USB cable, reconnect it to the rear of the printer.
Try to print.
Uso cartucce non originali, e ho sempre stampato bene fino a qualche tempo fa. Potrebbe dipendere da questo?
Altra cosa, uso Windows 10 ultima versione (1809) e non riesco a portare a termine l'installazione del software della stampante. Si blocca nella configurazione finale e mi da errore.
Grazie a chi pùò essermi d'aiuto
Ovviamente ho spento e riacceso millemila volte, ho provato a seguire le varie guide online tipo:
Step 1: Use genuine HP ink cartridges.
Step 2: Reset the printer.
In some cases, removing the ink cartridges and resetting the printer can clear the error message.
Turn on the printer.
Wait until the printer is idle and silent before you continue.
Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave your printer connected to the network.
Remove the ink cartridges from the printer.
With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
Wait at least 60 seconds.
Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to a wall outlet.
Reconnect the power cord to the rear of the printer.
Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Reinsert the ink cartridges, and then close the ink cartridge access door.
If you receive a prompt to print a calibration page, do so.
If you disconnected the USB cable, reconnect it to the rear of the printer.
Try to print.
Uso cartucce non originali, e ho sempre stampato bene fino a qualche tempo fa. Potrebbe dipendere da questo?
Altra cosa, uso Windows 10 ultima versione (1809) e non riesco a portare a termine l'installazione del software della stampante. Si blocca nella configurazione finale e mi da errore.
Grazie a chi pùò essermi d'aiuto